SeaGauge  Specifications

Remote Gauge Option

Sensor Inputs
12 analog sampled with 10-bit precision and 3 pulse input. Voltage divider and resistive inputs allow interface to most existing sensors/senders. 5 Volt reference voltage output available.
Calibration Tables
12 user modifiable sensor calibration tables. 256 data lookup points per sensor input. 4 character display lookup for each of 256 data points.
Pulse Inputs
User programmable Pulse scalar and average to support Tachometers and fuel flow
Data Port
Built-in Serial (RS232) USB and NMEA 2000 (DeviceNet)
Flash Port:
Firmware upgrades via USB port can be performed in the field without sending unit to factory
Data Out Formats

NMEA 2000 and NMEA 0183 $IIXDR sentences. Continuous transmission once per second. Multiple Engine Instance (Port, Starboard, Center)

PGN 124788 - Engine Parameters Rapid

PGN 127489 - Engine Parameters Dynamic

PGN 127505 - Fluid Level

PGN 127508 - Battery Status

PGN 127493 - Transmission Parameters

PGN 130312 - Temperatures

Data Input  Formats

NMEA 2000 and NMEA 0183 $IIXDR sentences. User selectable. Multiple Engine Instance (Port, Starboard, Center)

PGN 124788 - Engine Parameters Rapid

PGN 127489 - Engine Parameters Dynamic

PGN 127505 - Fluid Level

PGN 127508 - Battery Status

PGN 127493 - Transmission Parameters

PGN 130312 - Temperatures

PGN 130323 - Meteorological Data

PGN 130306 - Wind Data

PGN 130311 - Environmental Data

PGN 127250 - Vessel Heading

PGN 127251 - Attitude

PGN 127251 - Rate Of Turn

PGN 127501 - Switch Status

Display Mode
User defined labels for each sensor input. Labels are formatted into NMEA 0183 sentence on transmission for easy identification.
Alarms
Individual min and max alarms for each of 8 sensor inputs. All alarms are user programmable. Alarms are wired ORed to single alarm output signal.
Capture Interval
Unit continuously samples all sensor inputs and performs a multi-point average. Averaged data is formatted into a NMEA 2000 protocol and output once per second. 
Sensor Connections
Three 8-pin flying lead quick-connect cable harness or 24 position terminal block.
Network Connection
NMEA 2000 DeviceNet (micro)/ Serial (RS232) 8-pin Conxall, USB 8-pin Conxall
Dimensions
Rugged ABS sealed enclosure measures 8.2" X 4.7" X 2.4"
 

Back to Specs

Back To Home Page

Home  prices products order support contact

(c) Copyright 2006 Chetco Digital Inc. www.seagauge.com